3D-MC  Automatic, Stakeless Grading by TOPCON  

Revolutionary, simple, and accurate, Topcon's 3D-MC will put the future of machine control to work for your company today.

PERFORMANCE

SIMPLICITY

RELIABILITY

COMPATIBILITY

3Di-GPS+  Experience the productivity of Topcon GPS+ machine control with the new 3Di-GPS+ Indicate Control System.  Bulk earth moving equipment uses this technology to dramatically increase rough grading productivity.  Install 3Di-GPS+ on your scrapers, compactors, and large dozers, and the right amount of material will be moved right the first time.  This system is affordable, and easy to upgrade to a fully automatic GPS+ system.  Features include: simple interface, easy to use Grade Indicator for cut/fill operations, a new Benchmark feature to make it easier to check position, a new Machine Builder specific for scrapers, and real time pictures for the jobsite so an operator can mark clearing limits without the need of a surveyor.

3Dxi  A powerful indicate 3D GPS+ control system for excavators, the 3Dxi allows contractors significant productivity gains on their excavators like they have on their dozers, graders, and scrapers.  The 3Dxi has the same 3DMC software used in a System Five-3D box that is easy to use.  Real time movement of the bucket, stick, broom, and the entire machine are  displayed in multiple views (plan, profile, and section).  For instant grade verification, use the easy color Cut/Fill Indicator.  The elevation reference lets you control grade on the left, right, or middle of the bucket.  New state of the art CAN based Tilt sensors are small, sealed with no moving parts which makes them easy to install, and no linearization is required!  Change buckets quickly, and store up to six different sizes.  GPS+ (GPS, /GLONASS) receiver insures maximum productivity.  The 3Dxi is compatible with all MC receivers: Legacy E & HiPer Lite+.

3D-GPS+  With Topcon's 3D-GPS+ machine control system, an operator knows where he is on the jobsite and how far away the cutting edge of his machine is from final grade.  By triangulating distance measurements to satellites orbiting 12,000 miles in the sky, Topcon can locate any point on earth.  Add a base station to correct for errors, and GPS can accurately control the grading to 1/10' or less.  Move the material quickly with less stakes and eliminate the costly process of moving material twice by using 3D-GPS!  Topcon's 3D-GPS will allow you to track to most satellites, and insures you will not have any equipment downtime due to too few satellites found in GPS only systems.  Another unique feature of Topcon's system, the "Co-op Tracking", will allow you to stay locked on satellites while grading in and around trees.  This ability will allow you to stay on schedule even under difficult working conditions. 

3Di-LPS  Topcon's 3D-LPS (Local Positioning System) means high precision, stakeless grading.  The world's first and only layer based 3D machine control system, the 3D-LPS will significantly reduce or eliminate the stakes.  Features the world's first self-tracking Total Station with laser communication and the world's first three-way communicating laser receiver. 

GPT-9000A  For the most advanced system on the market today, the Topcon GPT-9000 series robotic total station has a new modern design and faster motors.  Available in 1, 3, and 5 second angle accuracies, all 9000 robotic systems offer reflector less measurement capable of measurements at a mind-boggling 2000 meters.  Topcon's new X-TRAC prism tracking technology upgrade is available for the  GPT-9000A.  With the new 2.4 GHz spread spectrum radio built into the 9000 series, off board dedicated channel radios for remote operation are a thing of the past. A startling 1000m range between the instrument and the controller mean that you will never have to worry about communications range between the components of your system.  To learn more about the GPT-9000A and other Topcon total stations, click here.

System Five-3D  The simplest control system your operator will ever use is Topcon's System Five-3D.  Instantaneously the operator will know how far the cutting edge is from the design grade, offset dialed in for rough grading or material sections and the desired cross slope.  The extremely bright, color coded touch screen displays roads, parking lots, building pads, and other information so the operator knows where they are on all the projects at all times.  Select any linework on the screen and  System Five-3D will provide steering information to get the grade right down to the last detail.  System Five-3D is also fully compatible with all of the Topcon's 2D systems from the last 15 years!

Pocket 3D  Topcon's Pocket-3D GPS field controller software is easy to learn, yet does not sacrifice power and performance.  Accurate within a couple of hundredths of a foot, Pocket-3D provides the perfect job site staking and grade control tool.  Most Common Features include Check Grades- verify cut/fill information, Stakeout Points, Tie-outs, Measure and Compare Surfaces and Quantities, and As-Builts.

Click here to learn more about Topcon's Millimeter GPS and Laser Zone technology.

Send mail to webmaster  with questions or comments about this web site.  Please call either store for product information or to place an order.
Copyright © 2006 - 2008 Bonneville Blueprint Supply, Inc.