With Leica
SmartPole, both TPS and GPS are available at all times to ensure every point
can be measured. When GPS is restricted by overhead obstructions… use TPS;
when no TPS line-of-sight is available... use GPS. Benefit from easy-to-use
GPS and continuous productivity.
Common Hardware Components
Leica
SmartPole is fully compatible with System 1200. The same SmartAntenna can be
used together with a TPS1200 as a SmartStation, together with a RX1250
controller as a SmartRover or together with a 360° reflector and RX1250
controller as a SmartPole. Common hardware components reduce costs and
increase the flexibility of equipment deployment.
Setup
On-the-Fly
Leica
SmartPole removes reliance on existing control and allows surveys to
immediately begin. Avoid time consuming traverses to bring control to the
survey area. Never make compromises with the TPS location and never search
for control points. With SmartPole, setup the TPS in the most convenient
location, instantly begin the survey and determine the TPS coordinates and
orientation On-the-Fly whilst conducting the survey. Save time and money.
Increase productivity and profits.
Increased Flexibility
Every survey
site is different. Some are best suited to TPS, others to GPS. With
SmartPole both TPS and GPS are available. When GPS is restricted by overhead
obstructions… use TPS; when no TPS line-of-sight is available... use GPS.
Benefit from easy-to-use GPS and continuous productivity. If upon completing
the SmartPole TPS setup GPS is no longer needed, then the SmartAntenna can
always be used as a SmartRover in parallel with the robotic TPS for double
productivity.
Leica
SmartRTK: Always in focus
Users of GNSS
Reference Station Networks expect their results to be consistent throughout
the com-plete Network, but often they’re unaware that virtually computed
Reference Stations compromise con-sistency. Only with Leica Geosystems
ingenious SmartRTK can you be sure that you’re getting the best performance
of your complete GNSS system. Even the new RTCM 3.1 International standard
now includes correction data designed by Leica Geosystems to ensure that the
results are consistent and traceable anywhere in the network. And the new
atmospheric decorrelator technology provides precise positioning in all
Networks regardless of the correction data.
