BONNEVILLE BLUEPRINT SUPPLY           

                      

           

Home
Up
GPS
Survey/ Eng
Construction
Service Dept.
Printshop
Printers/Plotters
Media

 

 

LS-B10/LS-B10W Laser Sensors

The LS-B10 laser receiver delivers a versatile, low cost indicate solution for grade checking and machine control grade applications. Although similar to the LS-B3, it is much smaller and weighs 66% less…the lightest weight in its class! With its integrated magnetic mount, the LS-B10 can be easily installed on a vast array of machines. And with its small, lightweight design, the LS-B10 with Holder-6 is excellent for manual grade checking as well!

LS-B10 Features:

bulletMachine control and grade checking capability
bulletLightest weight in its class…about 1 pound!
bullet4 on-grade zone selections (LED); coarse to fine grade for machine control
bullet11 LCD grade channels with 5 gradual triangles for out of grade indication
bullet270° detection range
bulletRed and green LED indicators

The new LS-B10W system adds to the productivity of your job site. The LS-B10W utilizes magnetic mountings and when used in conjunction with a Topcon laser level, the combination and productivity is unbeatable.

LS-B10W Features:

bulletSmall, Lightweight design
bullet270e detection
bulletRugged, Waterproof design
bulletWireless Support and CAN support
bulletMagnetic mounts for use anywhere

 

Specifications LS-B10 LS-B10W
Detector Length 4.72", 120 mm 4.72", 120 mm
Detector Angle 270° 270°
Display
On-Grade Zone (LED) .08, .24, .47, 1.18 inches, 2, 6, 12, 30 mm .08, .24, .47, 1.18 inches, 2, 6, 12, 30 mm
LED Grade Indicators Red (up arrow), Green (-), Red (down arrow) Red (up arrow), Green (-), Red (down arrow)
LED Grade Patterns 5 grade, 2 lost beam, 1 low battery, 1 level alert 5 grade, 2 lost beam, 1 low battery, 1 level alert
LCD One Side One Side
LCD Grade Indicators 11 channels, on-grade + 5 high gradual triangles 11 channels, on-grade + 5 high gradual triangles
LCD Backlight yes (wo/Auto) yes (wo/Auto)
Low Battery Indicator LED Pattern & LCD Symbol LED Pattern & LCD Symbol
Transmitter Low Battery Ind. LCD Symbol LCD Symbol
Transmitter Level Indicator LCD Symbol LCD Symbol
Physical
Mountings Built-in magnet mount, grade rod clamp attachment Built-in magnet mount, grade rod clamp attachment
Dual Sided Magnet Mount Yes Yes
Buttons 3 (1 power, 1 mode, 1 buzzer) 4 (1 power, 1 mode, 1 buzzer, 1 BT)
Beeper Dual tone, loud and light Dual tone, loud and light
Ports ----- CAN, Bluetooth
Connectors ----- One for CAN (M12)
Housing ABS ABS
Batteries 3 AA dry cell alkaline, no rechargeable 3 AA dry cell alkaline, no rechargeable
Battery Life Approximately 100 Alkaline hours, N/A rechargeable hours Approximately 20 Alkaline hours, N/A rechargeable hours
Enviromental
Operating Temperature -20 to +50 degrees Celsius -20 to +50 degrees Celsius
Storage Temperature -30 to +60 degrees Celsius -30 to +60 degrees Celsius
Humidity 95% 40° 48H 95% 40° 48H
Vibration JIS A 8101 JIS A 8101
Electrical EN55022 Class A EN55022 Class A, IEC801-2, IEC801-3
Waterproof IP66 IP66
Other
Optional Remote Grade Display No Yes; RD-10W, via BT
Power Save and Laser-on Power save in after 5 min with no beam detection, power back upon laser Power save in after 5 min with no beam detection, power back upon laser
Auto Shutoff After 30 minutes After 30 minutes
Mode to turn off LED Yes Yes
Bluetooth No Yes

 

 

Send mail to webmaster  with questions or comments about this web site.  Please call either store for product information or to place an order.
Copyright © 2006 - 2008 Bonneville Blueprint Supply, Inc.          Hit Counter