ARCHITECTURAL • ENGINEERING • CONSTRUCTION • SURVEYING • COPIERS & PRINTERS • REPROGRAPHICS

AERVOE  •  CARLSON  •  HP  •  KIP  •  LEICA   •  RITE IN THE RAIN  •  SCHONSTEDT  •  SOKKIA  •  SECO  •  TOPCON  •  XEROX

Home
Up
Contact Info
GPS
Survey/ Eng
Construction
Service Dept.
Printshop
Printers/Plotters
Media
Clearance
Class Registration
In Stock
Spectra Special
Used Equipment

 

 

 

PRISMS & ACCESSORIES

 

Rear Locking 62 mm Premier Prism Assembly
       

            

This prism assembly design incorporates a simple stainless steel locking mechanism that's easy to set while adjusting the prism and target tilt.  The heavy-duty 62 mm silver-coated prism is sealed in a strong canister with an 'O' ring to prevent water and dust from getting inside.  The prism can be mounted in either a0 or -30 mm offset positions.  Two target sizes and five color combinations are available: see below.  The tilting axis height is 115 mm.

 Number: Target Color: Target Size:
6402-20-FOW Flo Orange with White 6 x 9 in
6402-20-YLB Yellow with Black 6 x 9 in
6402-20-FLB Flo Yellow with Black 6 x 9 in
6402-20-FOB Flo Orange with Black 6 x 9 in
6402-20-WHB White with Black 6 x 9 in
6422-20-YLB Yellow with Black 5.5 x 7 in
6422-20-FLB Flo Yellow with Black 5.5 x 7 in
6422-20-FOB Flo Orange with Black 5.5 x 7 in
6422-20-FOW Flo Orange with White 5.5 x 7 in
6422-20-WHB White with Black 5.5 x 7 in

 

Rear Locking 62 mm Premier Prism Holder and Target

6402-20-050-FOB

This prism holder and target are the same as the above, without the canister.  Order the holder of your choice and choose a canister from below to create your custom setup.

 
62 mm Nitrogen Filled Prism with Hermetically Sealed Canister 62 mm Copper Coated Prism with Sealed Canister 62 mm Silver Coated Prism with Heavy Duty Canister 62 mm Silver Coated Prism with Heavy Duty Canister 62 mm Silver Coated Strobe Prism
6411-00 6411-02-BLK (Black)

6411-BLK-S (Silver Coated)

 6411-03-BLK 6411-04-BLK 6416-00
Features <5- second accuracy. Features <5- second accuracy. Features <5- second accuracy. Features <2- second accuracy. Features 0.5-second flash.

 

Front Locking Prism Assembly

Features of the new 3015 and 3050 series Prism Assemblies:

bullet

All metal tilting prism holder with improved front locking lever

bullet

58 mm prism with silver coating to protect against the weather

bullet

The prism is made of the finest optical glass and has a beam deviation of <5-second.

bullet

Tilting holder is made of anodized aluminum, brass and stainless steel hardware

bullet

Available in three color combinations with matching prism canister color

bullet

The target's horizontal line continues to the extreme edge to make height measurement easy with a pocket tape

bullet

The prism holder provides a 0 or -30mm offset configuration and is compatible with male 5/8 x 11 inch poles or tribrach accessories

bullet

Target height of 115 mm

 The 3015 is housed in American made rugged polypropylene canister that is highly impact resistant.     Weighs 1.54 lbs (0.69 kg)

The 3050 is housed in an American-made all aluminum canister.     Weighs 1.60 lbs (0.60 k)

3015-YLB

3050-FOB
Number: Target Color: Target Size:
3015-YLB Yellow with Black 5.5 x 7 inches
3015-FLB Flo Yellow with Black 5.5 x 7 inches
3015-FOB Flo Orange with Black 5.5 x 7 inches
3050-YLB Yellow with Black 5.5 x 7 inches
3050-FLB Flo Yellow with Black 5.5 x 7 inches
3050-FOB Yellow with Black 5.5 x 7 inches

 

Universal Tilting Prism Assembly
Features:
bulletAccuracy of the prism is <5 arc second
bulletThe prism is silver coated to protect against severe climatic conditions
bulletPolypropylene prism and canister have brass M20 thread and is highly impact resistant
bulletDual sided targets have -30 mm and 0 mm offsets
bulletThe target and yoke assembly are precision manufactured from high quality aluminum, stainless steel and brass
bulletEasy to use twist knob tilting target lock
bulletFits standard 5/8 x 11 prism poles, adapters, etc.
bulletHeight of tilting axis: 115 mm

Number: Target Color: Target Color:
2050-YLB Yellow with Black 4.5 x 4.5 inch
2050-FLB Flo Yellow with Black 4.5 x 4.5 inch
2050-FOB Flo Orange with Black 4.5 x 4.5 inch

 

SECO Eclipse 62 mm Nodal Point Prism Assembly 6400-00 This assembly is water resistant, nitrogen-charged, 62 mm prism canister and reversible target.  It can be set at a -40 mm, which offers optimal angle measurements, even when tilting in either the horizontal or the vertical axis.  A -30 mm adapter is included.

The height to the center of glass: 0.38 ft (115 mm).  Weighs 1.15 lb (0.52 kg)
       
62 mm Nodal Point Prism Assembly 6400-10 This assembly features three prism offset positions: 0, -30 and -40 (nodal).  The 62 mm prism is silver coated and has a < 5 second accuracy.  The reversible target comes in orange & white and black & white.

The height to center of glass: 0.33 (100 mm).  Weighs 1.45 lb (0.66 kg)
       
62 mm Nodal Point Prism Assembly 6406-00 High quality Swiss--style GPH1 Prism Assembly features a copper-coated prism for consistent results and a removable target.  -34 mm offset prism and 86 mm 'HT'.  Weighs 0.92 lb (0.42 kg)
       
Single Prism Tilting Assembly 6440-00-FOR High quality Swiss--style GPH1 Prism Assembly features a copper-coated prism for consistent results and a removable target.  -34 mm offset prism and 86 mm 'HT'.  Weighs 0.92 lb (0.42 kg)

Available colors: yellow, fluorescent yellow, fluorescent orange
       
62 mm Prism with Non-Tilting Holder 6440-10-FOR This assembly consists of an aluminum -30 mm offset (or zero offset prism) holder and a 62 mm, copper-coated prism in a sealed canister.  Weighs 1.5 lbs.

 

Premier Prism Assembly, 62 mm
Features a copper coated, canister-type prism.  Waterproof, M20 universal mounting thread.  Tilting holder is anodized aluminum and features an improved locking clamp screw design and 18-gauge steel target.  Can mount in either 0- or -30-mm offset positions.  Tilting access height: 115 mm.  Weighs 1.75 lb (0.8 kg).
Part Number Target Color Target Size
6402-02-FOW Flo Orange with White 6 x 9 inch
6402-02-YLB Yellow with Black 6 x 9 inch
6402-00-FLB Fluorescent Yellow with Black 6 x 9 inch
6402-02-WOB White with Black 6 x 9 inch
6402-02-FOB Fluorescent Orange with Black 6 x 9 inch
6422-02-WHB White with Black 5.5 x 7 inch
6422-00-FLB Fluorescent Yellow with Black 5.5 x 7 inch
6422-02-FOW Fluorescent Orange with White 5.5 x 7 inch
6422-02-FOB Fluorescent Orange with Black 5.5 x 7 inch

 

Standard Prism Assembly, 62 mm       

Features a copper coated, canister-type prism.  Waterproof, M20 universal mounting thread.  Tilting holder is powder-painted die cast aluminum.  Simple, but proven locking system.  Can mount prism in either 0- or -30-mm offset positions.  Tilting axis height:  115 mm.  Weighs 1.35 lb (0.62 kg).

 
Part Number Target Color Target Size
6402-10-YLB Yellow with Black 5.5 x 7 inch
6402-10-FLB Fluorescent Yellow with Black 5.5 x 7 inch
6402-10-FOR Fluorescent Orange with Black 5.5 x 7 inch

 

Tilting Triple Prism Assembly

6341-00

 Made from orange polycarbonate with metal inserts and an aluminum yoke.  Holds 1 or 3 prisms.  Compatible with most screw-in prisms.  Has a 0- and -30-mm prism offset.  It has a peep sight for pointing the holder.  The H.T. is 97 mm.  Comes with three 62 mm prisms.  Weighs 2.7 lb (1.23 kg).

       

Tilting Triple Prism Assembly

6450-00-BLK

 The Eclipse™ mini system includes: a Mini Tilting Prism (#6451-00-BLK); plumb bob attachment; Mini Bob Prism Mount (#6453-00); Point (#6220-00) and Belt Case (#8022-00-CABLU).  Weighs 0.3 lbs (0.14 kg)

       

Stakeout Mini Prism with Site Cones

 6405-10-FOR This prism features 'site cones' that improve vertical angle pointing and an adjustable side-mounted circular vial.  The site cones double as tilting-axis knobs.  The adjustable 40-min vial is mounted on the front side and is easy to see and adjust.  The prism can be set in 0 and -30 offset positions.

Weighs 0.3 lb (0.14 kg)
       

Nodal Point Stakeout Mini Prism with Site Cones

6405-12-FOR

This popular mini prism features the same site cones as the 6405-10-FOR listed above.  It has an adjustable 40-min vials mounted on the side for easy adjustment and is easy to see.  The prism is set at a -17.5 (nodal) offset position.

       

25 mm Mini Prism System

6200-10-FOR with Center Vial (shown)

6200-11-FOR with Side Vial

This system contains a copper coated 25 mm prism; a tilting holder (0,-30 mm offset) with a center- or side-mounted 40 minute vial; 100 and 115 mm adapters for pole or tribrach mounting (prism holder height, w/o adapters is 70 mm); S-hook and bracket for hand-held work; a point for stake-outs, (97 mm height); and a padded system bag for carrying it all.

       

Stakeout Mini Prism Kit

6405-11-FOR

The white site cones on X and Y axis of the assembly help improve centering of your instrument's crosshairs for vertical and horizontal pointing.  It can be used in four height configurations, 50 mm, 100 mm, 115 mm, and 150 mm, top or bottom of the pole, handheld, or tribrach mounted. 

Weighs 0.8 lb (0.36 kg), 1.3 lb (0.59 lb) with heavy-duty point.
       

Nodal Point Stakeout Mini Prism Kit

6405-13-FOR

The popular SECO stakeout prism is now in a kit form.  The prism features 0 and -17.5 mm offsets.  The white site cones on the X and Y axes help centering instrument crosshairs.  The heavy-duty point can handle the abuse on the bottom of a pole.  The white adapter is used to make the prism height 115 mm for use with most standard prism poles. 

Weighs 0.8 lb (0.36 kg), 1.3 lb (0.59 kg) with heavy-duty point.

 

Euro- Style Prism Pole Systems Sliding Prism and Sectional Pole Kit Pin Pole with Sliding and 25 mm Prism System
5910-01-ARD (0, -30 mm)

5910-02-ARD (-17.5 mm)

5910-03-ARD (-34 mm)

 5910-05

5910-06 (metric)

 6600-10
This system is ideal for all handheld prism work, topos, or precise layout work;  it can be assembled in various configurations.  It's available with most accurate offset position, (-17.5 mm) that places the optical center of the prism over the plumb line axis.  This eliminates angular pointing errors.  All anodized aluminum section lengths are known (30 cm).  It features a 40-min vial and white sight cones and comes with a 5/8 x 11 adapter for standard prism poles (for height of 115-mm).  An orange Cordura carrying case is also included.  Weighs 1.6 lb (0.73 kg). This system tilts and slides up and down pin poles.  It features a 25 mm, 0 offset coated prism and a high quality aluminum holder.  The site cones double as locks.  The prism has a 40-minute adjustable dial.  The kit includes four 1 foot pole sections with a 0.50 ft mark.  This prism includes an adapter so prism can be used on any pole or tribrach adapter with a 5/8 x 11 threads.  A system bag is also included.  Weighs 1.40 lbs (0.63 kg). The 25 mm sliding prism system features a silver-coated prism and 0 offset.  The holder easily slides down the pole, and the knobs lock in height and tilt- they also double as vertical angle targets.  An adjustable 40- minute circular vial is built in to the prism holder.  The 12.2 -mm OD pin pole features three sections- each 60 cm in length to achieve 1.8 m (5.91 ft); each color section (red or white) is 10 cm in length.  Other features include a replaceable stainless steel point on the pole, accessory kit with plumb bob hook and cone for attachment to the prism for handheld applications and a system bag.  Perfect for use with the Alligator Clamp Tripod.  Weighs 1.95 lb (0.9 kg).

 

62 mm Strobe Prism Premier Assembly 6402-03 (6 x 9 in)

6402-11 (5.5 x 7)

 The assembly combines the SECO Premier target and holder with a strobe prism.  It's perfect for low light conditions.  The silver coated-prism flashes every 1/2 second.  Model show weights 1.59 lb (0.72 kg).
       
25 mm Stakeout Prism Assembly 6405--01-FOR This 1-inch (25 mm) copper-coated prism features aluminum double yoke construction with a tilting coaxial target.  It has an adjustable offset of 0, -30 mm.  There are on-board 130-minute vials, top & bottom.  It includes replaceable plumb bob point.  The height to center of prism w/plumb bob point: 0.33 ft (100 mm).  Comes with case #8027-00-ORG.  Weighs 0.62 (0.28 kg)
       
25mm L-Bar Mini Prism 6600-02 Perfect for deformation or mining surveys, or in places where a permanent mounting is needed.  L-Bar and prism housing is constructed of anodized aluminum.  Prism is permanently bonded to the holder, making it water and dust proof.  Features -25-mm offset.  Weighs .45 lb (.20 kg)
       
Non- Tilting Prism Holder

6380-00-FOR

 Designed for use with screw in 62 mm canisters and features both Zero and -30 mm offsets and a 5/8 x 11 threaded base.  The height from the center of glass is 115 mm (4.52 in).  Available colors: yellow, fluorescent yellow, and fluorescent orange.  Weighs 0.80 lb (0.36 kg).
       
Small Tilting Reflector 6600-01 Perfect for short range measurements, or where retrieving the reflector is not practical or economical.  0-offset, 60-mm reflector of diamond pattern sheeting. Will fit Leica-style 12 mm or 5/8 x 11 male tips. Height:  86 mm  Weighs 0.15 lb (0.07 kg)

 

 

Prism Accessories Available:
Part Number Item Type
6020-01 25 mm mini prism in a canister
6030-01 Plumb bob bracket, -34 mm
6341-10 Tilting Triple Prism Holder
6341-11 Tilting Triple Prism Target
6402-10-050-FOR Standard Prism Holder (For 6402-10-XXX)
6403-02-FOB Premier Prism Holder with 6 x 9 inch Target, 0 and -30 mm offset
6410-00 Prism holder, -30 mm, -40 mm, offset (for 6400-00
6410-018 0 offset adapter for #6400-00
6423-02-FOB Premier prism holder with 5.5 x 7 inch target, 0 and -30 mm offset

 

 

Send mail to webmaster  with questions or comments about this web site.  Please call either store for product information or to place an order.
Copyright © 2006 - 2010 Bonneville Blueprint Supply, Inc.          Hit Counter