ARCHITECTURAL • ENGINEERING • CONSTRUCTION • SURVEYING • COPIERS & PRINTERS • REPROGRAPHICS

AERVOE  •  CARLSON  •  HP  •  KIP  •  LEICA   •  RITE IN THE RAIN  •  SCHONSTEDT  •  SOKKIA  •  SECO  •  TOPCON  •  XEROX

Home
Up
Contact Info
GPS
Survey/ Eng
Construction
Service Dept.
Printshop
Printers/Plotters
Media
Clearance
Class Registration
In Stock
Spectra Special
Used Equipment

 

 
   

TRIBRACHS AND ADAPTERS

 

Laser Tribrach 2153-02-BLK This tribrach has a bright 650 nm focused laser dot that provides prompt and precise positioning over a point.  It has a push-button on/off switch which is now located close to the tribrach body to prevent it from accidentally turning on during transport or handling.  This tribrach has a circular vial with 8 minute sensitivity.  It has 3 prong forced centering  with center lines on the leveling screw range.  Included is a standard 3 volt CR2 Panasonic lithium battery providing 10 hours of continuous operation.  Weighs 1.75 lb (0.75 kg).
       
European-Style Tribrachs 2152-05-BLK - Top with Optical Plummet These high-quality tribrachs are available with or without an optical plummet!  The #2152-05-BLK, with optical plummet, features a 2X magnification and a twist focus.  Its reticule is composed of two small concentric circles.  With a sighting distance of 0.3 m to 15 m, the tribrach has an accuracy of 0.5 mm per 1.5 m.  Both of these have a locking forced-centering knob, a 5/8 x 11 base and an 8-minute circular vial.  Each weigh 1.55 lb (0.70 kg).
2153-05-BLK - Bottom without Optical Plummet
       

Optical Plummet Twist Focus Tribrach

 2152-04-XXX

Available in black, green, yellow, or grey.

 		 Features a twist focus, 2.5X magnification and leveling screws with center line.  Eight minute circular vial, three-prong forced centering, and a 5/8 x 11 base.  Easy plummet adjustment is achieved using four opposing screws.  Optical plummet has a focusing range of 1.5 to 50 feet. Weighs 1.85 lb (.84 kg).
       
Tribrach Case 8071-00-ORG This padded carrying case for tribrachs has a heavy-duty zipper, dust flaps and nylon carrying straps.  6 x 6 x 2 in (15.24 x 15.24 x 5.08).  Weighs 0.40 lb (0.18).

 

Fixed Tribrach Adapter 2010-00 Use for mounting retro prisms and tripod mounted target systems.  Fits all "wild type" tribrachs with 5/8 x 11 mounting stud.  Weighs .5 lb (.23 kg)
       
Rotating Tribrach Adapter 2020-00 Rotating friction top tribrach adapter allows the prism to be pointed after installation in the tribrach.  Weighs 0.9 lb (.41 kg).
       
Rotating Tribrach Adapter 2070-00 This adapts retro prisms to "wild-type" tribrachs and has a removable Zeiss plug and locking screw.  Weighs 1.75 lb (.8 kg).
       
Prism H. T. Adapter 2071-00 This adapter allows adjustment of the prism height by moving the threaded brass insert in the adapter.  It fits all standard tribrachs and allows 2 inches of adjustment.  Weighs 1.91 lb (.87 kg).
       
Tribrach Adjusting Cylinder 2001-00

 

 Use for checking and adjusting optical plummet tribrachs in the office.  Precision-machined, black anodized aluminum.  Weighs .7 lb (.32 kg).
       
Tribrach Adjuster 2002-00 Use for checking and adjusting optical plummet tribrachs & tribrach bubbles.   Precision-machined, black anodized aluminum with 2 minute bubble.

 

Traverse Tribrach Adapter 2159-10-GRY This Tribrach Adapter is for traversing or precise setups.  The optical plummer is twist-focus with 2.5X magnification.  It has a 60-second adjustable plate vial.  The precision-machined axis rotates 360 degrees.  This adapter is compatible with all prisms with a 24.9 mm bayonet base.  The adjustable height is 100 mm to 120 mm.  It fits all standard three-prong tribrachs.  The over point accuracy is 0.5 mm at 1.5 m.  Available in gray, black, yellow and green.  Weighs 1.70 lbs (0.77 kg).

 

Traverse Kit 2159-01-GRY - Single Prism (Shown)

2159-02-GRY - Triple Prism

2159-00 - Without Prism

This kit includes:

bullet

62 mm prism assembly (#6400-10)

bullet

Rotating Tribrach  Adapter (#2153-10-GRY)

bullet

Bright orange hard-shell carrying case (#2159-050) with foam density inserts, nickel plated latches and backpack straps.

 

 

 

Send mail to webmaster  with questions or comments about this web site.  Please call either store for product information or to place an order.
Copyright © 2006 - 2010 Bonneville Blueprint Supply, Inc.          Hit Counter