|









| |
Instrument Tripods
|
HEAVY-DUTY, EXTRA TALL, FIBERGLASS
ELEVATOR TRIPOD |

|
|
Part# 5321-17-ORG |
| This tripod has a
fully-extended leg height of 12.40 ft (3.80 m); collapsed height is 5.97 ft
(1.82 m). The legs and dowels are constructed of fiberglass for
durability, strength and resistance to weathering. It features an
adjustable center column that gives you 5.97 ft (1.82 m) of lift. A
detachable round head plate, with a 5/8 x 11 stud, gives your instrument a
sturdy platform. Use with lasers, scanners, machine control, or other
instruments. Lockable leg stabilizers struts, dual clamps, twist locks
and quick clamps, along with dual metal and rubber leg points create greater
stability. It comes with a handy leg strap! Weighs 33. 1 lb
(15.0 kg). |
|
HEAVY-DUTY ALUMINUM ELEVATOR
TRIPOD |

|
|
Part# 5321-16-BLK |

|
| The SECO heavy-duty aluminum
tripod has an adjustable center column. The tripod extends to 7.6 ft
(2.3 m), with its rack-and-pinion lift system. It features a built-in
circular vial in the instrument head, quick clamp legs, and black hardware.
Safety chains on the legs prevent slipping on hard surfaces. The
tripods collapsed height is 4.26 ft (1.26 m). Weighs 16.3 (7.39 kg). |
|
PORTABLE 11 FT FIBERGLASS TRIPOD |

|
|
Part# 5203-20-ORG |
| This new tripod is very
portable; it breaks down in two, four-foot sections. It's easy to set
up and take apart and comes with two carrying cases. Add the three
additional legs and this tripod goes from 7 ft collapsed to 11 ft extended!
The tripod features a unique telescoping strut system to stabilize the
fiberglass legs, dual clamps on each leg, and a flat head with standard 5/8
x 11 instrument fastener. It's waterproof and ideal for machine
control, scanning, ag leveling or robotic applications where a taller
platform is required. Weighs 36 lbs (16.3 kg). |
|
PREMIER HEAVY-DUTY FIBERGLASS
TRIPOD |

|
|
EXTRA-LARGE TRIPOD BAG |
 |
|
Part# 5203-10-ORG
(Choose orange or black hardware) |
Part#
8154-11-ORG |
| Features include waterproof fiberglass
legs; quick-release and twisting locks; strap and hex tool under the cap!
It's ideal for all instruments and GPS gear. Weighs 18.5 lb (8.4 kg). |
This heavy-duty bag will carry many different
brands with ease. |
|
INSTRUMENT TRIPODS |
|
Accommodate 5/8 x 11 instruments. Ideal for
mounting lasers, total stations and auto levels. The telescopic legs
allow for setup at various heights and are available in yellow hardwood or
aluminum with orange and black hardware (on some models). Add a tripod
bag to keep your tripod safe and clean when it is not in use and tie down
kit that helps to keep your tripod upright in windy or difficult conditions! |
|
Part #
5301-20-ORG |
 |
Part# 5301-27-BLK |
 |
|
Quick Clamp Lock Type |
Quick Clamp Lock Type |
|
Aluminum Legs |
Aluminum Legs |
|
Weighs 14 lb (6.3 kg) |
Weighs 9 lbs (4.1 kg) |
|
66
inches (1.7 m) Extension |
65
inches (1.7m) extension |
|
Flat
Head |
Flat
Head |
|
Orange or Black Hardware |
Orange or Black Hardware |
|
Part# 5302-10-ORG |
 |
Part# 5311-20-ORG |
 |
|
Quick Clamp Lock Type |
Quick
Clamp Lock Type |
|
Hardwood/Fiberglass Legs |
Aluminum Legs |
|
Weighs 16.5 lb (7.5 kg) |
Weighs 14 lbs (6.3 kg) |
|
72
inches (1.8 m) Extension |
66
inch (1.7 m) Extension |
|
Flat
Head |
Dome
Head |
|
Orange or Black Hardware |
Orange Hardware |
|
Part# 5401-20-ORG |
 |
Part# 5402-10-ORG |
 |
|
Twisting Lock Type |
Twisting Lock Type |
|
Aluminum Legs |
Hardwood/Fiberglass Legs |
|
Weighs 14 lbs (6.3 kg) |
Weighs 16.5 lbs (7.5 kg) |
|
66
inch (1.7 m) Extension |
72
inch (1.8 m) extension |
|
Flat
Head |
Flat
Head |
|
Orange or Black Hardware |
Orange or Black Hardware |
|
Part # |
INSTRUMENT
TRIPOD ACCESSORIES |
| 5196-01 |
Tripod Collector Bracket |
Designed for TSCe/Ranger,
FS Series collectors. This bracket is fully adjustable. Weighs
0.98 lb (0.44 kg). |
 |
| Tripod Hook Brackets |
For securing
controllers to a surveying tripod. Both include instructions and a
tool for installation. Anodized black aluminum with stainless-steel
screws. |
 |
| 5196-14 |
For
Ranger™ 300X, 500X, TSC2 |
|
5196-15 |
For Recon® |
|
5196-16 |
Archer® |
|
5196-17 |
Nomad® |
| 5196-04 |
Tripod
Bracket |
This economy
model bracket fits snugly on a tripod and holds the Allegro, Archer,
Explorer, Recon, or Jett CE controller to a SECO or any similar brand
tripod. Weighs 0.05 lbs (0.02 kg). |
 |
| 5196-07 |
Tilted
Tripod Bracket |
This flexible
SECO bracket holds the Allegro, Archer, Explorer, Recon, or Jett CE
Controller to a SECO or any similar brand tripod. Weighs 0.06 lb (0.03
kg). |
 |
| 5610-00 |
Tripod Stabilizer |
The tripod
stabilizer is designed to provide the extra stability required when working
indoors on concrete and other hard surfaces. It is made of heavy-duty
aluminum and measures 35 x 35 x 35 inches (88.9 x 88.9 x 88.9 cm). It
collapses for compact storage. Weighs 3 lbs (1.36 kg). |
 |
|
Tripod Bag |
The tripod bag
holds all major brands of aluminum, fiberglass, and wood tripods. It's
made of heavy Cordura, has a leather bottom, and pull string ties at the
top. Measures 52 x 8.75 inches (132.1 x 22.23 cm). Weighs .26
lbs ( .57 kg). |
 |
| 8150-00-ORG |
Tripod Bag |
| 8150-20-ORG |
Tripod Bag
with Rhinotek® |
| 5196-13 |
Rotating Tripod Bracket |
This aluminum
bracket rotates around the tripod head for easier access to your collector.
This bracket is perfect for layout work or large topo surveys! Weighs
1.8 lbs (0.08 kg). |
 |
| 5119-013 |
Instrument Tripod Tie Down
Kit |
Contains aluminum
tie rods and a special clamp to fit your instrument tripod. You
provide the stakes and a mallet or hammer to complete the kit! Weighs
4.7 (2.13 kg). |
 |
| 2120-00 |
Tripod Adapters |
Adapts 3- 1/2 x 8
tripod to 5/8 x 11 |
 |
| 2130-00 |
Adapts 5/8 x 11
tripod to 3-1/2 x 8. |
| 2132-01 |
Adapts 5/8 x 11
tripod to 1/4 x 20. |
|